Adhesive-lined heat shrink tubing
Adhesive-lined heat shrink tubing has an additional inner adhesive layer, which makes it suitable for use in installations exposed to unfavourable external conditions, as well as those operating underground. The outer layer shrinks when heated, just like standard heat shrink tubing, while the inner adhesive layer melts and spreads, filling all gaps and ensuring a very precise adhesion to the wires along their entire length. The products in our offer come from the renowned manufacturer HellermannTyton, guaranteeing the highest quality and comfort of use. We offer a wide selection of sizes and colours, additionally allowing for marking and organising the installation. The products are available in packs of several pieces, as well as favourably priced sets, matching the individual needs of both big production companies and individual customers.
Commonly known as dual wall, adhesive lined heat shrink tubing has two layers – a standard outer wall made of cross-linked polyolefin and an inner wall made of a mixture of flexible adhesives. By heating the tubing from the centre towards the edges, air bubbles trapped under the surface are avoided and a precise seal is achieved. We offer thin wall heat shrink tubing with a shrink ratio of 3:1 and 4:1. The higher shrink ratio allows for covering larger items with different diameters using a single tubing. We also offer heat shrink tubing with a higher shrink temperature and therefore higher temperature resistance, suitable for more extreme conditions. The walls of those products are usually thicker, which makes them more resistant to mechanical damage such as abrasion.
Available in a variety of sizes and colours, both as individual pieces and in cost-effective kits, the adhesive-lined heat shrink tubing is designed for general applications.
A set of thin wall, adhesive lined heat shrink tubing, in 4 sizes and 2 colours (black and transparent). Ideal for assembling and identification of cables, the SHRINKIT 321 kit provides good adhesion and sealing. An inner wall of hot melt adhesive guarantees a secure seal against moisture as it cools. The 3:1 shrink ratio also allows for shrinking over 2 pieces with a large difference of diameters. The black tubes are mainly used for the protection of connectors and splices, the transparent tubes for the protection of printed label markers. The size of the compartments can be changed at will by moving the yellow dividers, and once the contents have been used up, the case can be reused to store various accessories.
Thin wall heat shrink tubing with adhesive provides working comfort and effective electrical insulation, as well as protection against corrosion and mechanical damage. The thermo-melting adhesive forming the inner wall melts when heated, filling the gaps between the wire and the tubing and protecting it against moisture and longitudinal water migration. Available in black and transparent, in 6 sizes for a wide range of applications, the 3:1 shrink tubing is supplied on a convenient reel.
Available in a wide range of sizes, adhesive-lined heat shrink tubing is designed for work in demanding conditions. HellermannTyton’s specialty tubing guarantees the highest quality and comfort of work.
This flexible, thin wall, heat shrink tubing from the EPS-400 series is designed for the environmental sealing of complex parts and protection of a wide variety of electrical applications. Manufactured from chemically cross-linked polyolefin, with a coextruded hot melt adhesive inner wall, the tubing provides effective protection against moisture and harmful external environmental factors, as well as mechanical damage. Widely used in the automotive industry, armament industry and electro-technical wholesale, it holds all the necessary approvals and industrial certificates.
Thin walled, adhesive-lined, halogen free heat shrinkable tubing with a 3:1 shrink ratio. HellermannTyton’s TA37 series of tubing is characterised by its non-combustible and flame retardant properties as well as a low smoke index. The self-extinguishing cross-linked polyolefin tubing meets strict fire security standards in electrical insulation.
Thin wall heat shrinkable tubing with a high shrink ratio of 4:1, lined with adhesive. The TA42 series is designed for the electrical insulation of wire junctions, terminations and other components and protection against harmful environmental factors. The high degree of expansion allows for the repair of damaged cable jackets without the need to remove the connectors. The tubing has excellent flame-retardant properties, hence it is ideal for use in the armaments industry, electrical engineering and rolling stock.
Medium and thick wall heat shrink tubing with adhesive liner combines great mechanical strength with the ability to be used in all conditions. Thanks to the thicker walls and the use of more polyolefin, the tubing is able to stretch more than standard, thinner tubing, allowing more wires to be insulated and marked using less product. These products are also more rigid and more durable, making them suitable for use in areas subject to greater stress and mechanical damage, for example underground. An internal adhesive liner provides effective protection against weathering and associated corrosion. We offer adhesive lined heat shrink tubing with shrink ratios from 3.5:1 to 6:1, all products meet stringent safety standards. Available individually, in packs of several pieces or in favourably priced sets, the tubing will protect both single, narrow cables and entire bundles.
Our offer consists of a wide range of HellermannTyton’s thick wall heat shrink tubing with adhesive lining. Available in various sizes and shrink ratios, sold in packs containing from 3 to 40 pieces, the products will fit any task.
Heavy duty, thick wall heat shrink tubing with a 3.5:1 shrink ratio is designed for use with low voltage power cables. Made from polyolefin, HA47 black tubing is internally coated with a thermoplastic adhesive that melts during shrinking to provide effective moisture protection. In addition to exceptional mechanical strength, the heat shrink tubing has excellent resistance to solvents, acids, alkalis and adverse weather conditions. Ideal for protecting cable joints and terminations placed outdoors and underground.
This mechanically durable heat shrink tubing with a high shrink ratio of 6:1 has been developed for the insulation and protection of connections between components with a large difference in diameters. Thanks to its internal thermoplastic adhesive lining, it provides excellent environmental sealing and electrical insulation. The impact and abrasion resistant tubing passes over large connectors and shrinks onto much smaller cable jackets, greatly simplifying the process of cable repair. Available in various sizes, it is supplied in 1.2m lengths.
Available individually or in larger packs, adhesive lined medium wall heat shrink tubing is used to insulate and protect cable joints and terminations in low voltage applications, both above and below ground. We offer products with a shrink ratio of 4:1.
Medium wall heat shrink tubing with a shrink ratio of up to 4:1 from HellermannTyton’s TREDUX series is used for electrical insulation and mechanical protection of cables and wires. It is suitable for low voltage applications and can be used both above and below ground. An internal thermoplastic adhesive liner provides thorough protection against moisture and weathering. Supplied in 1m lengths, the tubing is resistant to solvents, acids and alkalis.
This 4:1 heat shrink tubing with high mechanical resistance is designed for the insulation and protection of cable joints and terminations in low voltage applications. The medium wall MA47 tubing is internally coated with a thermoplastic adhesive which, when shrunk, provides additional protection against moisture and external environmental factors. Supplied in 1m lengths, available individually and in larger packs.